Need help?Do you have a question about the CYP AU-A300 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Input Impedance | 47kΩ |
| Frequency Response | 20Hz - 20kHz ±0.5dB |
| Total Harmonic Distortion | <0.05% |
| Audio Inputs | RCA |
| Audio Output | Binding posts |
| Power Supply | AC 230V / 50Hz |
Documents the version changes and updates made to the AU-A300 operation manual over time.
Details the controls and indicators on the front panel of the amplifier, including MIC, UPDATE, OLED, IR WINDOW, CONTROL, EXIT, and POWER.
Describes the various input and output ports located on the rear of the AU-A300 amplifier, such as HDMI, RS-232, Optical, Coaxial, and speaker terminals.
Explains the functions of each button on the supplied CR-126 remote control for operating the AU-A300.
Details the structure and options available within the AU-A300's OLED display menu for configuration and settings.
Provides pin assignments and communication parameters for RS-232 serial control of the AU-A300 amplifier.
Lists commands for controlling the AU-A300 via RS-232 and Telnet, including power, source, volume, and mute functions.
Guides users on how to establish and use a Telnet connection to control the AU-A300 amplifier from a PC or Mac.
Explains how to access and use the AU-A300's web-based graphical user interface for device management and control.
Details the technical specifications of the AU-A300, including input/output ports, power, dimensions, weight, and operating conditions.
Presents detailed audio performance specifications for the AU-A300, including input/output levels, THD+N, frequency response, and SNR.
Provides graphical data on the THD+N Ratio versus Measured Level for the amplifier channels of the AU-A300.
To Next Page
