14
6.7 Telnet Control
Before using the Telnet control, please ensure that both the Integrated
Zone Amplier (via the 'CONTROL' port) and the PC/Laptop are connected
to the same active network.
To access the Telnet control in Windows 7, click on the 'Start' menu and
type "cmd" in the Search eld then press enter.
Under Windows XP go to the 'Start' menu and click on "Run", type "cmd"
with then press enter.
In the Mac OS X Finder select Go
Applications
Utilities
Terminal from
the taskbar (See below for reference).
To Next Page
Loading...
