CYP DCT-39 - Introduction; Applications; Package Contents; System Requirements

1
1. INTRODUCTION
The digital audio processor is designed to allow optical or coaxial
LPCM audio source input and convert to different sampling rates
up to 192kHz/24bits. The digital audio processor utilizes DSP engine
instead of software process to prevent distortion. The converted audio
source signal could be output to both optical and coaxial audio
signals simultaneously. The outputs can be connected with amplier
for high quality audio output. Besides, the audio processor support
DSD over PCM (DOP) decodes to PCM in order to further process
the audio signal not only for sampling rate convert but also volume
control. Meanwhile, the pop noise could be reduced when plug in
audio source.
2. APPLICATIONS
• Professional music player
• Amplier producer
• Audio equipment manufacturer
• Studio
3. PACKAGE CONTENTS
• 1×Digital Audio Processor Main Unit
• 1×5 V/2.6 A Power Adaptor
• 1×Operation Manual
4. SYSTEM REQUIREMENTS
Input audio coaxial or optical audio source and output to amplier.