CYP PRO-SDIHDMI - Operation Controls and Functions; Front Panel Controls

7. Operation Controls and Functions
7.1 Front Panel
5
2
6
3
7
41
8 9
q
. Power LED: This red LED will switch on when the device is connected with
the power supply.
w
. Video Lock LED: This green LED will turn on when both the input SDI
source and the output HDMI display have sent and received a signal.
③
. Audio Lock LED: This green LED will switch on when the input SDI source
has an audio signal and when the output HDMI/DVI display activates.
④
. HDMI/DVI LED: This green LED will turn on when connected to an HDMI
display and will not switch on when connected to a DVI display. The
device will read the output display’s EDID to determine whether to send
an HDMI or DVI signal.
⑤
. 3G LED: This yellow LED will turn on when the input SDI signal is 3G.
⑥
. HD LED: This yellow LED will switch on when the input SDI signal is HD.
⑦
. SD LED: This yellow LED will turn on when the input SDI signal is SD.
⑧
. Audio out R/L: These slots are where you connect an amplier with a
RCA jack to, in order to transmit an audio signal.
⑨
. HDMI Out: This slot is where you connect a HDMI / DVI display with a
HDMI or HDMI to DVI cable to.
3