7.2 Rear Panel
1 2 3
①
. SDI IN: This slot is where you connect the SDI source to, in order to send a
SDI signal to a display.
②
. SDI OUT: This slot is where you connect the SDI display to, with an SDI
cable for displaying images. Connect it to another SDI to HDMI
converter/ extender to extend your signal or connect to multiple displays.
③
. DC 5V: Plug the 5V DC power supply into the unit and connect the
adaptor to an AC outlet. The red LED will turn on when the power is on.
4
To Next Page
Loading...
