CYP PU-424HBTE - RS-232 & Telnet Commands

12
6.7 RS-232 & Telnet Commands
Command (Case Sensitive) Description
A1~A4 Switch output A to 1~4
B1~B4 Switch output B to 1~4
C1~C4 Switch output C to 1~4
D1~D4 Switch output D to 1~4
AB...1~CD...4 Switch output ABCD... to 1~4
SETIP<IP><SubNet><GW> Setting IP. SubNet. GateWay (Static IP)
RSTIP IP Conguration: Reset to Factory
Defaults <DHCP>
IPCONFIG Display the current IP cong
P0 POWER OFF
P1 POWER ON
I1~I4 Switch all outputs to 1~4
ST Displays the current matrix status and
rmware version
RS System Reset to A1, B2, C3 & D4
EM Setting EDID MODE. 1=STD, 2=TV
? Display all the available commands
Quit Exit (for telnet only)
Note: All the commands will not be executed unless followed with a carriage
return. All letters are case-insensitive.