CYP PU-424HBTE - Operation Controls and Functions; Front Panel Controls

8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
OUT
1
2
3
4
IN
CMSI-424E
4X4 HDMI MATRIX
POWER LOCK MENU
A
B
C
D
61 2 3 4 5
1
LCM : Displays the setting information of each input and output
setting.
2
IR: IR Receiver window (accepts the remote control signal of this
device only).
3
POWER: Press this button to power the device on/o. The LED will
illuminate green when the power is on, red when it is in 'Standby'
mode.
4
LOCK: Press this button to lock all the buttons on the panel; press
again to unlock. The LED will illuminate when locked.
5
Menu: Press once to select EDID setting from STD (internal) 1 or TV
(external) 2 then press it again to conrm the selection. Press the the
'MENU' button to conrm the input or output selection
6
1~4/A~D and Out/In: Press the Out or In button to select the output
or input mode and then press the required number or letter button to
change the selection.
For example, if outputs A~B need to be set to input 1 and outputs
C~D need to be set to input 2, then the following sequence of button
presses need to be performed:
Press: Out
→
A
→
B
→
In
→
1
→
Menu,
and then press: Out
→
C
→
D
→
In
→
2
→
Menu.
Note: If the menu button is not pressed the selection will not be changed.