7
Connect the unit under power ON status with USB cable from PC/
Laptop. Click on Search to allow the unit to be lined up.
Under EDID Controller user may select EDID from Internal, External
or User as a reference for input HDMI source, the selection will act
correspondingly with the unit’s LED light.
EDID may be uploaded, simply by open the EDID’s *.bin le and click
on Upload the unit will check EDID’s Header and Checksum and
proceed the upload. When the upload is successfully done EDID
mode will switch to User.
EDID may also be downloaded, simply by a click on Internal, External
or User and the unit will download current EDID with a pop up screen
to save.
To Next Page
Loading...