CYP XA-HDCP - Top Panel

4
6.2 Top Panel
PWR
YUV
420
USB
LINK
SYNC
HDCP
EDID
3G
6G
1.4
2.2
INT
EXT
USER
2
3
4
1
5
6
1
PWR LED: This LED will illuminate when the device is connected with
power supply from the AC outlet.
2
SYNC LEDs: These LEDs will illuminate according to both HDMI input
and output signal’s current bandwidth. When input signal is 6G
and YUV420 button is pressed to switch output signal to 3G YUV420,
both LEDs will illuminate. When the LED is blinking it represent signal
has issue occureed.
3
HDCP LEDs: These LEDs will illuminate according to both HDMI input
and output’s HDCP encrypted signal. When both input and output
signal are HDCP 2.2 encrypted and when input signal is HDCP 2.2
encrypted and whether output display is with HDCP 1.4/2.2 both
LEDs will illuminate. When the LED is blinking it represent HDCP has
failed and when LED is not illuminating it represent no HDCP. Other
LED illumination please referes to below chart.