5
LED
Source
1.4 2.2 Non-HDCP
Display
Signal
1.4 1.4 1.4 & 2.2 -
2.2 1.4 1.4 & 2.2 -
Non-HDCP 1.4B 1.4B -
B: Blinking
4
EDID LEDs: These LEDs will illuminate according to the selected EDID
setting.
5
YUV420 LED: This LED will illuminate according to YUV420’s selection.
6
USB LINK LED: This LED will illuminate when the connected USB
device is valid for PC control.
6.3 Side Panel
YUV420 EDID
ACTIVE SRC
1
YUV420: Press this button to allows HDMI input 6G signal to be
subsampling to YUV420 from YUV444.
2
EDID: Press this button to select EDID of INTernal/EXTernal or USER
where internal EDID is 1080p at 2CH, external EDID is depending on
the connected HDMI output display and USER is for user to upload
with default setting on 4K2K@60_YUV420 2CH.
3
ACTIVE SRC: Press this button to force the connected HDMI output
display to output image always.
Note: Output display must support CEC in order to perform this
function.
DS
SS
To Next Page
Loading...