when the input is 5V. DIG1 and DIG2 is digital inputs and it
controls the direction of the motor respectively.
0 - OFF 1 - ON X - Don’t Care
Figures below show the connection in analog/PWM input mode.
Analog input mode with Joystick board (Mixed), DIP switch
DIP Switch Setting
1 2 3 4 5 6 7 8
0 1 0 0 0 0 0 0
PWM input mode with microcontroller (Independent Both), DIP switch
DIP Switch Setting
1 2 3 4 5 6 7 8
1 0 1 1 0 1 0 0
Created by Cytron Technologies Sdn. Bhd. – All Rights Reserved 17
To Next Page
Loading...