④ Enter the activation code into the PSDK activation
code box of FlightHub 2 and press Enter to activate it.
①Flight control parameter setting
2. Calibrate the compass
Method I: Calibrate via FlightHub 2 (to be supported
by DJI FlightHub 2)
Method II: Calibrate by remote control (after installing
MP20 on the drone, connect the remote control and operate
as below)
01 02 03 04 05 06 07 08 09 10 11
12 13 14 15 16 17
18 19 20 21 22 23
To Next Page
Loading...