Czur TouchBoard V1 - User Manual

Touchboard V1 User manual

Summary

How to Use the TouchBoard

Pairing the TouchBoard with StarryHub

Details the steps for pairing the TouchBoard with the StarryHub, including power-on and dock placement.

Switching Input Methods

Instructions on how to switch between touch panel and keyboard input methods.

Volume Adjustment

Guidance on adjusting the StarryHub volume using the TouchBoard's V- and V+ controls.

Auto-focus Operation

How to use automatic and manual focus for the projector lens via the TouchBoard.

Signal Source Switching

Procedure for changing the projection source (StarryHub, HDMI, Wireless Casting).

Back Navigation

How to return to the previous page or operation using the Back function.

Finger Touch Gestures

Overview of operating the device using various finger touch gestures.

Advanced Finger Gestures

Details on specific slide, zoom, and click gestures using one or multiple fingers.

Keyboard Input

Instructions on using the TouchBoard as a keyboard for input.

Low Battery Indicator

Information on the low battery LED and how to recharge the TouchBoard.

Touchpad Standby and Sleep Modes

Touchpad Standby Behavior

Explains how the touchpad enters standby mode due to inactivity.

Wake-up from Standby

Methods to wake the touchpad from standby mode.

Touchpad Sleep Behavior

Details on how the touchpad enters sleep mode and its definitions.

Wake-up from Sleep

Procedures to wake the touchpad from sleep mode.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

The CZUR Touchboard V1 is a wireless controller designed to operate the StarryHub, providing an intuitive interface for managing its functions. It acts as a remote control, allowing users to interact with the StarryHub's features through a combination of touch gestures and keyboard input.

Function Description:

The Touchboard V1 serves as the primary input device for the StarryHub, enabling users to navigate menus, adjust settings, and control various operations. It supports both touch panel and keyboard input methods, offering flexibility depending on the task at hand. The device is designed for ease of use, with dedicated controls for common functions such as volume adjustment, focus control, and signal source switching.

Important Technical Specifications:

While specific technical specifications like battery capacity, dimensions, or wireless protocol versions are not explicitly detailed in the provided pages, the manual highlights several operational aspects:

• Wireless Connectivity: The Touchboard V1 connects wirelessly to the StarryHub. It is factory-paired by default, simplifying the initial setup process.
• Charging: The Touchboard V1 is recharged by placing it back into the charging dock located on top of the StarryHub. A low battery indicator (red LED) signals when recharging is needed.
• Input Methods: It supports two main input methods: a touch panel for gesture-based control and a keyboard for text entry.
• Power Management: The device incorporates intelligent power management features, including standby and sleep modes, to conserve battery life.

Usage Features:

The Touchboard V1 offers a rich set of usage features to enhance the StarryHub experience:

• Power On/Off: To begin using the Touchboard, the power button on its back must be turned to the "ON" position.
• Pairing: Although factory-paired, the manual describes a re-pairing process:
  1. Ensure both StarryHub and Touchboard are powered on.
  2. Long-press the "Board ↔ Touch" button for 5 seconds until the upper right corner indicator blinks blue.
  3. Place the Touchboard back into the charging dock and wait 10 seconds for the first row of icons to light up, indicating successful pairing.
• Input Method Switching: Tapping the "Board ↔ Touch" button allows users to toggle between the touch panel and keyboard input modes.
• Volume Adjustment: Dedicated "V-" and "V+" controls enable easy adjustment of the StarryHub's volume.
• Auto-focus/Manual Focus: Tapping the focus icon automatically focuses the projector lens. A long press on the same icon activates manual focus. If the StarryHub's auto-focus setting is enabled, the projector will automatically adjust focus when moved.
• Signal Source Switching: The signal source icon allows users to switch between StarryHub's internal display, HDMI input, or Wireless Screen Casting.
• Back Function: A dedicated "Back" button allows users to return to the previous page or operation.
• Finger Touch Gestures (Touch Mode):
  • Single Tap and Slide: Used for dragging targets.
  • Two-finger Slide: For general navigation and scrolling.
  • Two-finger Zoom: For zooming in and out.
  • Three-finger Tap: To pop up more operation options.
  • Double-click with one finger then slide: A specific gesture for certain interactions.
  • Three-finger Click: Another specific click gesture.
• Keyboard Input (Keyboard Mode): When in keyboard mode, the Touchboard's keyboard lights up, allowing for text entry. The "En" or "Shift + Space bar" combination can be used to switch input languages.

Maintenance Features:

The manual outlines several features related to the maintenance and longevity of the Touchboard V1:

• Battery Status Indicator: A red LED indicator in the upper right corner signals a low battery, prompting the user to recharge the device.
• Charging: The device is recharged by placing it on the StarryHub's charging dock, which features three pins for contact charging.
• Power Management (Standby & Sleep):
  • Touchpad Standby:
    • In Touch mode, it enters standby after 5 minutes of no operation.
    • In Keyboard mode, it switches to Touch mode after 1 minute of no operation, then enters standby after 5 minutes in Touch mode.
  • Standby Definition: Only the power indicator light remains on; backlight for functional and keyboard areas are off.
  • Wake from Standby: Any key press will wake up the touchpad.
  • Touchpad Sleep:
    • Enters sleep after 24 hours of no operation while Bluetooth is connected.
    • Enters sleep after 30 minutes of no operation if Bluetooth is not connected.
  • Sleep Definition: All indicator lights are off, and the device enters deep sleep.
  • Wake from Sleep: Place the touchpad in the projector's charging area, or turn the power switch off and then on again.

These features collectively ensure that the CZUR Touchboard V1 is a versatile, user-friendly, and energy-efficient controller for the StarryHub.

Czur TouchBoard V1 Specifications