D.A.S. Convert 15A Series User Manual

Manual del Usuario / convert 15A series / User’s Manual
OK
OK
OK
OK
Press ‘OK’ for exit.
Also, if you press on the right arrow, we go to a new menu where you can
choose a high-pass filter or not (default: OFF).
Press ‘OK’ for exit.
If you press on the right arrow, we go to other menu. Afterwards, we can
go to the left arrow only or exit.
Also, if the menu shows ‘Configuration’ we go to the menu ‘Utilities’ by
pressing the right arrow. If you press ‘OK’, we go to this menu.
In this firmware version, this menu can replace only default parameters of
the unit (including the gain to 0 dB and the delay to 0 ms). If you press and hold
‘OK’, until the arrows cover the lower half of the screen, the display will show
this:
Finally, the display will show the default parameters.
convert 1560A
convert 1590A
16

D.A.S. Convert 15A Series Specifications

General

Brand	D.A.S.
Model	Convert 15A Series
Category	Speakers
Language	English