Need help?Do you have a question about the D.A.S. H-2200 and is the answer not in the manual?
General| Frequency Response | 20 Hz - 20 kHz |
|---|---|
| Signal-to-Noise Ratio | > 100 dB |
| THD | < 0.05% |
| Input Impedance | 20kΩ |
| Cooling | Forced Air |
General overview of the D.A.S. power amplifier features and technology.
Lists key features like Class H, dual balanced XLR inputs, and various protections.
Details the power switch, power LED, clip LED, protection LED, and signal LED.
Explains how to adjust volume levels for each channel using rotary potentiometers.
Describes the function of cooling grilles and the importance of keeping them clean.
Lists conditions that can trigger channel protection, such as overheating or DC output.
Details speaker output binding posts and Speakon connectors, and XLR inputs.
Explains the input mode selection switch and the mains lead connection.
Covers fan inlet grille maintenance for proper cooling.
Provides guidance on rack mounting and ensuring adequate ventilation for cooling.
Explains how to connect input and speaker cables to the amplifier.
Outlines the correct procedure for switching the sound system and amplifiers on and off.
Explains the clip LED indicator and the function of level controls for gain adjustment.
Details EIA power output for different impedances and modes (stereo, bridge).
Lists technical specifications for distortion, frequency response, and rise time.
Covers input sensitivity, voltage gain, and input impedance.
Provides amplifier topology, weight, and physical dimensions.
Refers to graphical representations of the amplifier's physical layout and dimensions.
To Next Page
