Series R y ST. Manual de Usuario /
R and ST Series. User's Manual
49
ST-112
Figures show the block diagram and basic set-up. Due to the
complexities of its electronic processing, it requires the use of
the D.A.S. CT-1800, a three way active monophonic system
processor for driving the ST-112 in conjunction with bass
units.
ST-215
Figures show the block diagram and basic set-up. Due to the
complexities of its electronic processing, it requires the use of
the D.A.S. CT-2000, a two/three way active monophonic
system processor for driving the ST-215 in conjunction with
bass units or standalone.
ST-218
Figures show the block diagram and basic set-up. The ST-218
is a bass unit for active systems, so an electronic crossover
will be required with a crossover frequency set in the range
from 80 to 160 Hz. One of such units, capable of driving two
way-active systems, is the D.A.S. CT-1, which features a
mid/high stereo output and a monophonic subwoofer output
with a crossover of 100 Hz. If used in conjunction with a
mid/high D.A.S. unit for which a specific processor is required,
use the processor specified for the mid/high unit.
To Next Page
Loading...
