D'Amore Engineering AMM-1 - The purpose of the AMM-1; Measure True Amplifier Power output; Measure Common DC voltages; Measure DC voltage drops

3
The purpose of the AMM-1
The purpose of this tool is to enable the user to:
 Measure True Amplifier Power output into any load
reactive or resistive
 Measure Common DC voltages
 Measure DC voltage drops during quick transients
on cable runs or battery / charging systems
 Measure Impedance of speakers at any power or
frequency from 20Hz - 1kHz (box rise)
 Measure Phase Difference between Voltage and
Current into reactive loads (Power Factor)
 Find Tuning Frequency of subwoofer enclosures
 Tune subwoofer enclosures for maximum power
transfer
 Measure AC Volts (amplifier output)
 Measure AC Amps (amplifier output)
 Measure apparent power (VA)
 Measure Frequency of a Sine Wave
.
What is included?
 The AMM-1 tool
 Protective silicon rubber boot
 Harness
 This manual
 Pride of ownership