D'Amore Engineering AMM-1 User Manual

4
About the design
When you pick up the AMM-1 know that you are holding
a precision piece of equipment. If treated as such it
should provide you with many years of reliable service.
We have chosen a 9V battery as a power source for a
few reasons:
 They are readily available
 Isolating the AMM-1 from the electrical system under
test, this guarantees that it will only measure what it
is supposed to measure.
Specifications
Everyone hides these in the back of the book. We are
proud of our specs, so we are put them up front.
 DC Voltmeter -100 Volts to +100 Volts
 AC Voltmeter 0 - 150 VRMS
 AC Ammeter 0 - 100 ARMS
 AC Apparent Power 0 - 15,000 VA
 Power Factor 50 - 100%
 Frequency 10 - 20,000 Hz
 AC Impedance 0 - 200 Ohms
 True Power Dyno 0 - 15,000 Watts
 Auto-shut off timer 8 - 10 minutes after ON button is
pressed
 Battery self-test and display of condition when
AMM-1 is initialized

D'Amore Engineering AMM-1 Specifications

General

Brand	D'Amore Engineering
Model	AMM-1
Category	Multimeter
Language	English