D-Link AirPlus G DWL-G510

Configuration Utility (continued)
Confi
g
uration
SSID: The Service Set Identifier is the name assigned to the wireless network. Th
e
factory SSID setting is set to default. Make changes here to match the SSID o
n
existin
g
Wireless Router or
A
ccess Point.
Wireless Mode: Click on the pull-down menu; select from the following options:
Infrastructure - Connecting to the WLAN using an access point. (This is
the default setting.)
Ad-Hoc - Wireless mode used when connecting directly to a computer equipped
with a wireless adapter in a Peer-to-Peer environment.
Data Encryption: The default setting is set to Disabled. The adapter supports WEP
and W
P
A
/WPA2 when encr
yp
tion is enabled.
Authentication: Allows you to specify the authentication mode for the network. The
default settin
g
is set to O
p
en
A
uthentication.
Key Length: When encryption is enabled, you will have the option to specify the leve
l
and key format of the encryption used. Select the appropriate Key Index: 1-4 and ente
r
A
SCII or hexadecimal di
g
its in the a
pp
ro
p
riate field.
IEEE 802.1x: When encryption is enabled, you will have the option to specify if you wish
to use 802.1x authentication.
Click Appl
y
to save the chan
g
es.
15