15
Using the Configuration Menu
Home > Wireless
Apply-
Click Apply to save the changes.
Keys 1-4-
Input up to 4 WEP keys; select the one you wish to use.
Passphrase-
When you select Key Type: ASCII, you can enter a Passphrase
for any or all of Keys 1-4
Key Type-
Select HEX or ASCII
WEP Encryption-
Select the level of encryption desired: 64-bit, or 128-bit
SSID-
Service Set Identifier (SSID) is the name designated for a spe-
cific wireless local area network (WLAN). The SSID’s factory
default setting is default. The SSID can be easily changed to
connect to an existing wireless network or to establish a new
wireless network.
WEP-
Wired Equivalent Privacy (WEP) is a wireless security protocol
for Wireless Local Area Networks (WLAN). WEP provides secu-
rity by encrypting the data that is sent over the WLAN. Select
Enabled or Disabled. Disabled is the default setting. (Note: If
you enable encryption on the DI-624 make sure to also enable
encryption on all the wireless clients or wireless connection will
not be established.)
Channel-
6 is the default channel. All devices on the network must share
the same channel. (Note: The wireless adapters will automati-
cally scan and match the wireless setting.)
To Next Page
Loading...
Need help?
General
