Need help?Do you have a question about the D-Link DI-624 and is the answer not in the manual?
General| Wireless Standard | 802.11g |
|---|---|
| Frequency Band | 2.4 GHz |
| Wireless Data Rates | Up to 54 Mbps |
| LAN Ports | 4 x 10/100 Mbps |
| WAN Ports | 1 x 10/100 Mbps |
| Security | WEP, WPA, WPA2 |
| Firewall | SPI |
| VPN Pass-through | IPSec/PPTP |
Lists the necessary system requirements for configuring the wireless router, including operating system and browser versions.
Provides guidelines for maximizing wireless range by considering walls, materials, and RF noise sources.
Details how to configure wireless network settings like SSID, Channel, and WEP encryption.
Explains how to set up the router to obtain an IP address automatically from the ISP for dynamic connections.
Covers setting up virtual servers to allow remote access to LAN services by redirecting incoming traffic.
Describes how to create firewall rules to allow or deny traffic, enhancing network security.
Guides users on how to upgrade the router's firmware to improve functionality and performance.
Provides step-by-step instructions for setting up a home or small office network using Windows XP.
Details the process of manually assigning a static IP address to a computer on the network.
Provides solutions for issues where the computer cannot access the router's configuration interface.
Explains how to perform a hard reset on the router to restore it to its original factory default settings.
Lists the various wireless data rates supported by the router, including automatic fallback speeds.
Addresses common issues related to accessing the router's web-based configuration interface.
Guides users on configuring the router to work with a cable modem connection for internet access.
Explains how to open specific ports on the router to allow incoming traffic for applications.
To Next Page
