D-Link DI-624 - What Are Virtual Servers?; How Do I Use PC Anywhere with My DI-624 Router?

To Next Page

To Previous Page

Frequently Asked Questions (continued)

What are virtual servers?

A Virtual Server is deﬁned as a service port, and all requests to this port will be

redirected to the computer speciﬁed by the server IP. For example, if you have an

FTP Server (port 21) at 192.168.0.5, a Web server (port 80) at 192.168.0.6, and

a VPN server at 192.168.0.7, then you need to specify the following virtual server

mapping table:

Server Port

Server IP

Enable

21 192.168.0.5 X

80 192.168.0.6 X

1723 192.168.0.7 X

How do I use PC Anywhere with my DI-624 router?

You will need to open 3 ports in the Virtual Server section of your D-Link router.

Step 1 Open your web browser and enter the IP Address of the router

(192.168.0.1).

Step 2 Click on

Advanced at the top

and then click Virtual

Server on the left side.

Step 3 Enter the

information as seen

below. The Private IP

is the IP Address of the

computer on your local

Step 4 The ﬁrst entry

will read as shown

Step 5 Click Apply

and then click Continue.

Other manuals for D-Link DI-624