D-Link AirPremier N DAP-2310

3
ENGLISH
If any of the above items are missing, please contact your reseller.
Connecting the DAP-2310 to your network
C. Antennas
Used to broadcast wireless network
and recieve connections from
802.11 b/g/n wireless clients.
B. LAN Port
Connects DAP-2310
to a switch or PC.
A.
Connect the power adapter to the receptor on the rear panel of the
DAP-2310 and then plug the other end of the power adapter to a wall outlet
or power strip. The power LED will turn ON to indicate proper operation.
Using an Ethernet cable, insert one end of the cable to the LAN port on the
rear panel of the DAP-2310 and the other end of the cable to a switch.
Note: You can also connect the DAP-2310 directly to the
computer that will be used for conguration. The LAN LED
will illuminate to indicate a proper Ethernet connection.
Computers with 802.11 b/g/n wireless adapters can connect to the DAP-2310.
B.
A. Power Receptor
Receptor for Power Adapter.
C.
D. Reset
Reset the Access Point.