Do you have a question about the D-Link DAP-2660 and is the answer not in the manual?
2.4 GHz | Yes |
---|---|
Modulation | PSK |
Frequency band | 2.4, 5 GHz |
Number of users | - user(s) |
Channels quantity | - channels |
Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3u |
Maximum data transfer rate | 1200 Mbit/s |
Internal | No |
Certification | FCC\\r IC\\r CE\\r UL |
Security features | Network access point (NAP) |
Security algorithms | 64-bit WEP, 128-bit WEP, 802.1x RADIUS, SSID, WPA, WPA2 |
Antenna features | Integrated antenna |
Antennas quantity | 4 |
Antenna gain level (max) | 4 dBi |
Power consumption (typical) | 11 W |
Storage temperature (T-T) | -20 - 65 °C |
Operating temperature (T-T) | 0 - 40 °C |
Storage relative humidity (H-H) | 5 - 95 % |
Operating relative humidity (H-H) | 10 - 90 % |
Package depth | 269 mm |
Package width | 204 mm |
Package height | 64 mm |
Package weight | 562.5 g |
Pallet width | 1200 mm |
Pallet length | 1100 mm |
Pallet height (air) | 2047 mm |
Pallet gross weight (air) | 439460 g |
Quantity per pallet (air) | 480 pc(s) |
Shipping (inner) case width | 290 mm |
Shipping (inner) case height | 239 mm |
Shipping (inner) case length | 352 mm |
Shipping (inner) case weight | 4385 g |
Shipping (inner) case net weight | 2230 g |
Number of cartons per pallet (air) | 96 pc(s) |
Quantity per shipping (inner) case | 5 pc(s) |
Harmonized System (HS) code | 85176990 |
Width | 170 mm |
---|---|
Height | 28 mm |
Weight | 316 g |
Describes the physical and functional aspects of the access point, including its antennas and chassis.
Details the high-speed wireless performance and support for multimedia applications.
Outlines the security features like WPA2, MAC filtering, and VLAN support.
Explains the function of each LED indicator on the access point.
Describes the physical ports and their functions on the access point.
Step-by-step guide for connecting the AP using a PoE switch or router.
Step-by-step guide for connecting the AP using a PoE adapter and base unit.
Step-by-step guide for connecting the AP without PoE, using a power adapter.
Covers fundamental wireless and network configurations for the access point.
Details the Local Area Network IP settings and configuration options.
Explains the configuration for IPv6 readiness and IP address assignment.
Introduces various advanced configuration options for wireless performance and resource management.
Provides an overview of monitoring capabilities for device information, clients, and logs.
Covers system administration settings like user management and network names.
Details procedures for upgrading the device firmware and uploading SSL certificates.
Explains how to backup and restore the access point's configuration settings.
Describes how to configure the device's time, date, and daylight saving settings.
Outlines options for restarting the device, factory resets, and language pack management.
Accessing the built-in help system for function descriptions and explanations.
Provides fundamental concepts and benefits of wireless networking technology.
Offers guidelines for maximizing wireless range and ensuring optimal signal reception.
Addresses common issues preventing access to the device's web interface.
Explains the procedure for resetting the access point password to factory defaults.
Provides steps to verify the assigned IP address of a network adapter.
Guides users through manually configuring a static IP address for network devices.
Lists the hardware and software specifications of the D-Link DAP-2660.
Provides warnings regarding potential radio interference in domestic environments.
Details compliance with FCC rules for digital devices and potential interference.
Warns against unauthorized modifications to the equipment.
Addresses FCC radiation exposure limits and co-location with other transmitters.
States compliance with Industry Canada license-exempt RSS standards.
Reiterates IC radiation exposure limits and usage restrictions.