D-Link DAP-2660

D-Link DAP-2660 User Manual
7
Hardware Overview
LEDs Connections
1
2
3
1 Reset Button
Press and hold for six seconds to reset the access point
to the factory default settings.
2 LAN (PoE) Port Connect to your network with an Ethernet cable.
3 Power Receptor Connect the supplied power adapter.
1 Power
The light blinks in red during boot up or malfunction,
and lights in solid red when the bootup is failed. The LED
lights in solid green when it is ready, and blinks in green
when the trace is passing through.
1