Need help?Do you have a question about the D-Link DAP-2553 - Wireless N Dual Band Gigabit Access Point and is the answer not in the manual?
General| Wireless Standards | IEEE 802.11a/b/g/n |
|---|---|
| Frequency Bands | 2.4 GHz, 5 GHz |
| Maximum Data Rate | 300 Mbps |
| Power over Ethernet (PoE) | Yes (802.3af) |
| Dimensions | 200 x 200 x 40 mm |
| Weight | 0.65 kg |
| Humidity | 10% to 90% non-condensing |
| Security | WPA/WPA2, WEP |
| Operating Temperature | 0 to 40 °C |
| Operating Modes | Access Point, WDS |
| Power Supply | 12V DC, 1A |
| Advanced Features | VLAN, QoS |
| Storage Temperature | -20 to 65°C |
| Ethernet Ports | 1 x Gigabit Ethernet |
Configures fundamental wireless parameters like band, SSID, and channel.
Configures Open System, Shared Key, WPA/WPA2, and 802.11x authentication.
Configures LAN IP, subnet mask, gateway, DHCP server, and static IP assignments.
Includes performance, Multi-SSID, VLAN, Intrusion, Schedule, QoS, AP Array.
ARP Spoofing Prevention, MAC Address Filtering, and WLAN Partition.
Solutions for problems accessing the device's web interface.
Steps to reset the access point if the administrator password is forgotten.
Instructions on how to submit a warranty claim and obtain an RMA number.
To Next Page