Need help?Do you have a question about the D-Link DAP-2682 and is the answer not in the manual?
General| 2.4 GHz | Yes |
|---|---|
| MIMO type | Multi User MIMO |
| Frequency band | 2.4 - 5 GHz |
| Cabling technology | 10/100/1000Base-T(X) |
| Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3ab, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u |
| Virtual LAN features | Multiple VXLAN (MUX VLAN) |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Mean time between failures (MTBF) | 341897 h |
| Maximum data transfer rate (5 GHz) | 1700 Mbit/s |
| Maximum data transfer rate (2.4 GHz) | 600 Mbit/s |
| Security algorithms | 64-bit WEP, 128-bit WEP, WPA2 |
| Number of SSID supported | 16 |
| Service Set Identifier (SSID) features | SSID broadcast |
| USB 2.0 ports quantity | - |
| Ethernet LAN (RJ-45) ports | 2 |
| Input current | 2.5 A |
| AC input voltage | 12 V |
| Power consumption (max) | 15.5 W |
| Placement | Ceiling, Wall |
| Certification | FCC, CE, UL |
| Product color | White |
| LED indicators | Power, Status |
| Antenna type | Internal |
| Antenna gain level (max) | 4.8 dBi |
| Storage temperature (T-T) | -20 - 65 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 95 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Harmonized System (HS) code | 85176990 |
Weight and Dimensions| Width | 190 mm |
|---|---|
| Height | 43.7 mm |
| Weight | 551.6 g |
Describes the product's purpose and benefits for SMB networks.
Lists the main functionalities of the Nuclias Connect software.
Basic wireless setup: SSID, visibility, channel selection.
Details wireless authentication methods like WPA and WEP.
Explains WEP security protocol, configuration, and key matching.
Configures WPA mode and cipher types for enhanced security.
Configures RADIUS server settings for WPA authentication.
Explains DHCP and static IP assignment for the LAN interface.
Enables multiple SSIDs for network segmentation and guest networks.
Views and manages the list of configured Virtual LANs.
Manages user accounts for the built-in RADIUS server.
Prevents ARP spoofing via IP/MAC mapping.
Sets bandwidth limits for wireless clients.
Configures captive portal for web redirection.
Configures captive portal login using username and password.
Sets up captive portal authentication using passcodes.
Configures settings for remote RADIUS authentication.
Configures settings for LDAP authentication.
Configures settings for POP3 authentication.
Allows specific MAC addresses to bypass security.
Configures the DHCP server's IP address pool.
Assigns fixed IP addresses to stations via MAC.
Configures MAC address filtering for access control.
Enables or disables IP filtering rules.
Customizes uplink and downlink bandwidth for interfaces.
Prioritizes network traffic for different applications.
Updates device software by uploading firmware.
Backs up and restores settings by uploading configuration files.
Resets the DAP-2682 to its original factory default settings.
To Next Page