Need help?Do you have a question about the D-Link Nuclias Connect DAP-2622 and is the answer not in the manual?
General| Brand | D-Link |
|---|---|
| Model | Nuclias Connect DAP-2622 |
| Category | Wireless Access Point |
| Language | English |
Lists the primary capabilities and benefits of the Nuclias Connect management solution.
Details the items included in the DAP-2622 Nuclias Connect package.
Specifies the necessary hardware and software for using the DAP-2622.
Explains the status indicators on the DAP-2622 access point.
Describes the available ports and connectors on the DAP-2622 access point.
Guides the user through physically setting up the DAP-2622 access point.
Configures the DAP-2622 to function as a standard wireless access point.
Sets up Wireless Distribution System (WDS) for bridging networks.
Configures the DAP-2622 to act as a wireless network adapter.
Adjusts wireless channel and width for optimal performance.
Manages MAC cloning and scans for available wireless networks.
Explains WEP encryption, its modes, and configuration parameters.
Details WPA/WPA2 security protocols, including Personal and Enterprise modes.
Optimizes wireless performance and controls resources.
Configures multiple SSIDs, VLANs, and intrusion detection.
Manages wireless scheduling, RADIUS, ARP prevention, and bandwidth.
Sets up web authentication portal for guest access.
Manages IP address assignment through DHCP.
Configures MAC bypass and custom login pages.
Controls wireless access based on MAC addresses, allowing or rejecting devices.
Configures WLAN partitioning to manage wireless network segments and link integrity.
Filters network traffic by IP address or network address to control client access.
Customizes Ethernet and wireless downlink/uplink bandwidth rates.
Creates traffic management rules to control client traffic and specify speeds.
Displays firmware, hardware, and system status of the DAP-2622.
Shows details of connected wireless clients and WDS status.
Provides network traffic data for wired and wireless interfaces.
Shows system and network messages, including timestamps and message types.
Configures log server IP, types of logs to send, and email notification settings.
Access to system configuration like admin limits and naming.
Controls administrator login based on VLAN ID or IP range.
Configures device name, UI login credentials, and console protocols.
Manages ping control, LED status, DDP, country, and Nuclias Connect.
Updates the access point's firmware by uploading a file from a local computer.
Uploads a saved configuration file to restore or update the access point's settings.
Configures automatic time synchronization using NTP and time zone settings.
Manages device restart, factory reset, and language packs.
Provides brief descriptions of wireless settings for quick reference.
Lists supported IEEE standards and network protocols.
Details management interfaces and security features.
Covers physical dimensions, voltage, antenna, and power consumption.
To Next Page
