D-Link Nuclias Connect DAP-2622

D-Link DAP-2622 User Manual
59
Filters
This page allows the user to congure Wireless MAC ACL settings for access control.
Wireless Band:
Access Control List:
MAC Address:
MAC Address List:
Current Client
Information:
Upload File:
Load ACL File to Hard
Drive:
Displays the current wireless band rate.
Select Disable to disable the lters function.
Select Accept to accept only those devices with MAC
addresses in the Access Control List. All other devices
not on the list will be rejected.
Select Reject to reject the devices with MAC
addresses on the Access Control List. All other devices
not on the list will be accepted.
Enter each MAC address that you wish to include in
your lter list, and click Apply.
When you enter a MAC address, it appears in this list.
Highlight a MAC address and click Delete to remove
it from this list.
This table displays information about all the current
connected stations.
To upload a ACL list le, click Browse... and navigate
to the ACL list le saved on the computer, and then
click Upload.
To download ACL list le, click Download and to save
the ACL list.
Wireless MAC ACL