Need help?Do you have a question about the D-Link Nuclias Connect DAP-3666 and is the answer not in the manual?
General| Device Type | Wireless Access Point |
|---|---|
| MU-MIMO | Yes |
| PoE | 802.3af PoE |
| Management | Nuclias Connect |
| VLAN Support | Yes |
| Operating Humidity | 10% to 90% non-condensing |
| Wireless Standard | 802.11ac |
| Frequency Band | 2.4 GHz, 5 GHz |
| Ethernet Port | 1 x Gigabit Ethernet |
| Mounting | Wall or Ceiling |
| Operating Temperature | 0 to 40 °C |
| Wireless Security | WPA, WPA2, WPA3 |
| Maximum Data Rate | 1200 Mbps (867 Mbps on 5 GHz + 300 Mbps on 2.4 GHz) |
| Antenna | Internal |
Lists the main functionalities and benefits of Nuclias Connect software.
Lists all items included in the DAP-3666 package.
Outlines the necessary hardware and software requirements for using the DAP-3666.
Details the components and ports located on the rear of the DAP-3666.
Explains the meaning of different LED colors and patterns on the DAP-3666.
Describes the different ports on the DAP-3666 and their functions.
Explains the four operating modes of the DAP-3666: Access Point, WDS with AP, WDS, and Wireless Client.
Details the steps to power the access point using PoE switch or kit.
Provides guidelines for optimal placement and environmental factors for wireless signal strength.
Guides users through the initial setup process using the setup wizard.
Configures fundamental wireless parameters like band, SSID, and visibility.
Details the settings for operating the device as an Access Point.
Covers WDS with AP, WDS, and Wireless Client operational modes.
Explains the WEP security protocol and its configuration options.
Details WPA/WPA2 security protocols and their configuration.
Configures wireless performance parameters like data rate and beacon interval.
Manages wireless connection parameters like airtime fairness and bandsteering.
Enables and configures multiple Service Set Identifiers for advanced wireless networks.
Displays and manages the configured VLANs, including VLAN ID, name, and port assignments.
Shows the current ports and their VLAN tagging status.
Configures Port VLAN Identifier settings for auto-assignment.
Configures interworking features and Online Sign-Up parameters.
Displays WAN status and configures Hotspot 2.0 list parameters.
Covers Web Redirection, Username/Password, Passcode, RADIUS, LDAP, POP3 authentication.
Allows uploading a custom HTML page for the captive portal login.
Configures dynamic/static IP pools and displays current IP assignments.
Configures MAC address filtering for wireless access control.
Configures bandwidth limits for uplink and downlink traffic.
Prioritizes network traffic based on application type.
Displays device, client, and WDS connection details.
Shows Ethernet and WLAN traffic statistics.
Displays system logs and configures log settings.
Manages device administration, login, and system naming.
Covers firmware updates, configuration file management, and time/date settings.
Handles device restart, factory reset, and user logout.
Addresses problems with wireless client internet access, signal loss, and connection drops.
Guides on checking IP addresses, assigning static IPs, and recovering forgotten passwords.
Displays antenna radiation patterns for 2.4GHz and 5GHz bands.
Lists technical details, standards, security, and certifications of the DAP-3666.
Provides FCC, IC, and NCC compliance statements and warnings.
To Next Page
