D-Link Nuclias Connect DAP-3666

32D-Link DAP-3666 User Manual
Web User Interface
Wireless Resource
The Wireless Resource Control window is used to congure the wireless connection settings so that the device can detect better wireless
connections in your environment.
Airtime Fairness Click the drop-down menu to enable or disable
the airtime fairness function.
Bandsteering Click the drop-down menu to enable the Band
Steering function. When the wireless clients
support both 2.4GHz and 5GHz and the 2.4GHz
signal is not strong enough, the device will use
5GHz as the higher priority.
Wireless Band Click the drop-down menu to select the wireless
band, 2.4GHz or 5GHz.
Connection Limit Click the drop-down menu to enable or disable
the connection limit function. This determines
whether to limit the number of users accessing
this device, eective for load balancing. The
exact number is entered in the User Limit
eld below. This feature allows users to share
their wireless network trac and clients using
multiple APs. If this function is enabled and
when the number of users exceeds this value,
or the network utilization of this AP exceeds
the percentage that has been specied, the
DAP-3666 will not allow clients to associate with
the AP.
User Limit (1 - 64) This function is only available when Connection
Limit is Enabled. Set the maximum amount of
users that are allowed access (1 - 64 users) to the
device using the specied wireless band.
11n Preferred Click the drop-down menu to disable or enable
the 11n Preferred function. The wireless clients
with 802.11n protocol will have higher priority
to connect to the device. The function is only
available when Connection Limit is Enabled.