D-Link Nuclias Connect DAP-3666

89D-Link DAP-3666 User Manual
Web User Interface
Country Settings
Select a Country Click the drop-down menu to select a country.
Note: To save the new conguration settings to the rmware, click
Conguration > Save and Activate, otherwise click Discard Changes to
delete any setting change.
LED Settings
LED Status Click the radio button to select the LED on or o.
Note: To save the new conguration settings to the rmware, click
Conguration > Save and Activate, otherwise click Discard Changes to
delete any setting change.
DDP Control Settings
Status Check the box to enable the DDP control
setting.
Note: To save the new conguration settings to the rmware, click
Conguration > Save and Activate, otherwise click Discard Changes to
delete any setting change.
Nuclias Connect Settings
The Nuclias Connect section is used to create a set of APs on the Internet to be organized into a single group in order to increase ease of
management. Nuclias Connect and AP Array are mutually exclusive functions.
Enable Nuclias Connect Click the drop-down menu to enable or disable
the Nuclias Connect.
Note: To save the new conguration settings to the rmware, click
Conguration > Save and Activate, otherwise click Discard Changes to
delete any setting change.