Need help?Do you have a question about the D-Link NUCLIAS CONNECT and is the answer not in the manual?
General| Wireless Standards | IEEE 802.11 a/b/g/n/ac |
|---|---|
| Ethernet Ports | 1 x Gigabit Ethernet |
| Model | NUCLIAS CONNECT |
| Frequency Bands | 2.4 GHz and 5 GHz |
| Maximum Data Rate | 1200 Mbps |
Introduces D-Link's centralized management solution for SMB networks, highlighting its ease of use, scalability, and features.
Lists the items included in the DAP-X2810 package, such as the access point, mounting brackets, and quick install guide.
Outlines the hardware and software requirements needed for configuring and managing the DAP-X2810 access point.
Details the physical components of the DAP-X2810, including LEDs and connection ports.
Provides step-by-step instructions for the initial hardware setup and configuration of the DAP-X2810.
Covers configuration for Access Point, WDS with AP, and WDS modes for network connectivity.
Details security protocols like WEP, WPA/WPA2/WPA3 for protecting wireless networks.
Details how to configure IP settings for the Local Area Network (LAN) interface of the DAP-X2810.
Explains how to enable and configure IPv6 settings for the DAP-X2810.
Covers settings related to wireless performance, such as data rate, transmit power, and WMM.
Guides through setting up a captive portal for user authentication and network access control.
Explains how to configure the DAP-X2810 to act as a DHCP server, managing IP address assignments.
Displays detailed information about the DAP-X2810 hardware, firmware, and network status.
Provides insights into network traffic, including Ethernet and WLAN statistics for data throughput and errors.
Covers administrative tasks like user management, system naming, console access, and security settings.
Allows users to restart the device, restore factory defaults, or clear language packs.
To Next Page