D-Link NUCLIAS CONNECT

27D-Link DAP-X2810 User Manual
Section 3 - Conguration
Multi-SSID
The device supports up to eight multiple Service Set Identiers. You can set the Primary SSID in the Basic > Wireless section. The SSID’s factory
default setting is dlink. The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network.
Enable Multi-SSID:
Enable Priority:
Band:
Index:
SSID:
SSID Visibility:
Security:
Priority:
WMM (Wi-Fi
Multimedia):
Check to enable support for multiple SSIDs.
Check to enable the Priority function.
Select 2.4GHz or 5GHz.
You can select up to seven multi-SSIDs. With the Primary SSID, you have a
total of eight multi-SSIDs.
Service Set Identier (SSID) is the name designated for a specic wireless local
area network (WLAN). The SSID’s factory default setting is dlink. The SSID can
be easily changed to connect to an existing wireless network or to establish
a new wireless network.
Enable or Disable SSID visibility. Enabling this feature broadcasts the SSID
across the network, thus making it visible to all network users.
The Multi-SSID security can be Open System, WPA-Personal, or WPA-Enterprise.
For a detailed description of the Open System parameters please go to pages 17. For a detailed description of the WPA-Personal
parameters please go to page 18. For a detailed description of the WPA-Enterprise parameters please go to page 19.
Select the priority level of the SSID selected.
WMM stands for Wi-Fi Multimedia. Enabling this feature will improve the user experience for audio and video applications over a Wi-Fi
network.