D-Link NUCLIAS CONNECT

79D-Link DAP-X2810 User Manual
Section 3 - Conguration
Firmware and SSL Upload
This page allows the user to perform a rmware upgrade. This upgrades the software running on the hardware used by the access point. This is a
useful feature that prevents future bugs and allows for new features to be added to this product. Please go to your local D-Link website to see if
there is a newer version rmware available.
Firmware and SSL
Certication Upload:
Upload Firmware from
Local Hard Drive:
Language Pack Upgrade :
Upload SSL Certication
from Local Hard Drive:
You can upload les to the access point.
The current rmware version is displayed
above the le location eld. After the
latest rmware is downloaded, click on
the “Choose File” button to locate the
new rmware. Once the le is selected,
click on the “Open” and “Upload” buttons
to begin updating the rmware. Please
don’t turn the power o while upgrading.
After you have downloaded a language
pack to your local drive, click “Choose
File.” Select the language pack and click
“Open” and “Upload” to complete the
upgrade.
After you have downloaded a SSL
certication to your local drive, click
“Choose File.” Select the certication and
click “Open” and “Upload” to complete
the upgrade.