D-Link NUCLIAS CONNECT

60D-Link DAP-X2810 User Manual
IP Filter Settings
Enter the IP address or network address that will be used in the IP lter rule (e.g. an IP address like 192.168.70.66 or a network address like
192.168.70.0). This IP address or network will be inaccessible to wireless clients in this network.
Wireless Band: Click the drop-down menu to select the wireless
band, 2.4GHz or 5GHz.
SSID Index: Click the drop-down menu to select the SSID for
the IP lter.
Filter State: Click the drop-down menu to enable or disable
the lter state. By default this feature is disabled.
IP Address: Enter the IP address or network address.
Subnet Mask: Enter the subnet mask of the IP address or
networks address.
IP Address List: When an IP address is entered, it appears in the
list. Highlight an IP address and click Delete
icon to remove it from the list.
Upload IP Filter File: To upload the IP lter list le, click Choose File
and navigate to the IP lter list le saved on the
computer, and then click Upload.
Download IP Filter File: To download the IP Filter list le, click Download
and to save the IP lter list.
Save: Click to save the updated conguration.
To make the updates permanent, click
Conguration > Save and Activate.