D-Link Nuclias Connect DAP-3666

33D-Link DAP-3666 User Manual
Web User Interface
Network Utilization Enter a value to set the maximum utilization of this access point for service. The DAP-3666 will not allow any new clients to
associate with the AP if the utilization exceeds the value the user species. Select a utilization percentage between 100%, 80%,
60%, 40%, 20%, or 0%. When this network utilization threshold is reached, the device will pause one minute to allow network
congestion to dissipate. The function is only available when Connection Limit is Enabled.
Aging out Use the drop-down menu to select the criteria of disconnecting the wireless clients.
RSSI Threshold When Aging out is RSSI, click the drop-down menu to select the percentage of RSSI. When the RSSI of wireless clients is lower
than the specied percentage, the device disconnects the wireless clients. The function is only available when Aging out is RSSI.
Data Rate Threshold When Aging out is Data Rate, click the drop-down menu to select the threshold of data rate. When the data rate of wireless
clients is lower than the specied number, the device disconnects the wireless clients. The function is only available when Aging
out is Data Rate.
ACL RSSI Click the drop-down menu to enable the ACL RSSI function. When enabled, the device denies the connection request from the
wireless clients with the RSSI lower than the specied threshold below.
ACL RSSI Threshold Click the drop-down menu to set the ACL RSSI Threshold.
Save Click to save the updated conguration. To make the updates permanent, click Conguration > Save and Activate.