D-Link Nuclias Connect DAP-2622

D-Link DAP-2622 User Manual
10
Setup Wizard
The rst login instance displays the System Settings window which requires you to change the password used to access the web UI. Additional
settings include the System Time and System Country functions.
After logging in to the user interface, ll in the New Password and Conrm New Password elds.
In the System Time function, select Using Network Time Protocol (NTP) or Manually to dene the system time. If required, click the Daylight Sav-
ing Oset drop-down menu and select the value (minutes).
y Setting NTP System Time: Before trying to congure NTP, perform a ping test with the NTP server. In the NTP Server eld, enter the NTP server
to use. Then click the Time Zone drop-down menu and select the appropriate time zone.
y Setting System Time Manually: From the System Date drop-down menu, select the Year, Month, and Day along with the Hour and Minutes
appropriate for the AP.
y Enable Daylight Saving: Click the radio button to enable the daylight saving time (DST) function. Set the DST start and end time by clicking
on the drop-down menus and setting the Month, Week, Day, Hour, and Minute of the DST starting days.
y System Country: Click the drop-down menu to select your country.
Once the settings are congured, click the Update button to accept the conguration and proceed to the main interface menu page.