D-Link Nuclias Connect DAP-2622

D-Link DAP-2622 User Manual
8
Basic Installation
Hardware Setup
To power the access point, you can use one of the following 2 methods:
Method 1 - Use if you have a PoE switch or router
Method 2 - Use if you have a PoE injector and do not have a PoE-capable switch or router
DAP-2622
PoE Switch
Method 1 - PoE with PoE Switch or Router
Plug in one end of your Ethernet cable into the LAN port of the DAP-2622’s back panel,
and the other end into the port on a switch.
Congure the Access Point
1. Connect the access point and your computer to the same PoE switch. Manage the
access point from the computer.
2. Enter dap2622.local in the address eld of your browser.
3. Log in to the Administration Web pages. The default login information is:
Username: admin
Password: admin
Computer