D-Link Nuclias Connect DAP-2622

D-Link DAP-2622 User Manual
36
Intrusion
The Wireless Intrusion Protection window is used to set your APs to All, Valid, Neighborhood, Rogue, and New. Click the Save button to let
your changes take eect.
Wireless Band Click the drop-down menu to select the
wireless band, 2.4GHz or 5GHz.
Detect Click Detect to initiate a scan of the
network.
AP List Click the drop-down menu to select All,
Valid, Neighborhood, Rogue, and New.
The following is a denition of the listed AP
categories:
y Valid: An AP which is authenticated to the
network with encryption is classied as
valid.
y Neighborhood: A detected AP with a
weak signal strength is classied as a
suspect neighbor.
y Rogue: An AP that has been installed
on the secure network with out explicit
authorization.
y New: An alternative category.
From the AP List select a detected AP and
click Set as Valid, Set as Neighborhood, Set
as Rogue, or Set as New to manually dene
the category type for the AP. Alternatively,
click the radio button to mark all new access
points as valid or rogue.
Save Click to save the updated conguration.
To make the updates permanent, click
Conguration > Save and Activate.