D-Link DAP-2682

20D-Link DAP-2682 User Manual
Section 3 - Conguration
WPA Mode:
Cipher Type:
Group Key Update
Interval:
Network Access
Protection:
RADIUS Server:
RADIUS Port:
RADIUS Secret:
Accounting Mode:
Accounting Server:
Accounting Port:
Accounting Secret:
Save:
When WPA-Enterprise is selected, you must also
select a WPA mode from the drop-down menu:
AUTO (WPA or WPA2) or WPA2 Only.
When WPA-Enterprise is selected, you must also
select a cipher type from the drop-down menu:
Auto, AES, or TKIP.
Select the interval during which the group key
will be valid. 3600 is the recommended value as
a lower interval may reduce data transfer rates.
Enable or disable Microsoft Network Access
Protection.
Enter the IP address of the RADIUS server to be
used in authenticate.
Enter the RADIUS port.
Enter the shared secret to be used between the
radius server and the DAP to authenticate.
Click the drop-down menu to enable or disable
the accounting mode.
Enter the IP address of the accounting server.
Enter the accounting port.
Enter the accounting secret.
Save the updated configuration. Click
Conguration > Save and Activate to make
changes permanent.