D-Link DAP-2682 - IPv6 Network Settings; IPv6 Settings Configuration

22D-Link DAP-2682 User Manual
Section 3 - Conguration
IPv6
Enable IPv6:
Get IP From:
IPv6 Address:
Prex:
Default Gateway:
Check to enable IPv6
Dynamic IP is chosen here. Choose this option
the DAP-2682 can get IPv6 address automatically
or use Static to set IPv6 address manually.
When Auto is selected, the other elds here will be
grayed out.
Enter the LAN IPv6 address used here.
Enter the LAN subnet prex length value used here.
Enter the LAN default gateway IPv6 address used here.