D-Link DAP-2682

79D-Link DAP-2682 User Manual
Section 3 - Conguration
Nuclias Connect Settings
The Nuclias Connect section is used to create a set of APs on the Internet to be organized into a single group in order to increase ease of man-
agement. Nuclias Connect and AP Array are mutually exclusive functions.
Enable Nuclias Connect: Click the drop-down menu to enable or disable
Nuclias Connect.
Note: To save the new conguration settings to the rmware, click
Conguration > Save and Activate, otherwise click Discard Changes to
delete any setting change.
DDP Setting
Router Settings
Each of the eight main categories display various hidden administrator parameters and settings.
Each of the eight main categories display various hidden administrator parameters and settings.
Status is enabled by default. Uncheck the
box to disable DDP control.
Select on/o for the Router Status.
Select weither or not to use PoE.
Country Setting
Select a Country: Choose from drop down list country where
device is located.