51D-Link DAP-2553 User Manual
Section 3 - Configuration
Filters
Wireless MAC ACL
Displays the current wireless band rate.
Select Disable to disable the filters function.
Select Accept to accept only those devices
with MAC addresses in the Access Control
List. All other devices not on the list will be
rejected.
Select Reject to reject the devices with MAC
addresses on the Access Control List. All other
devices not on the list will be accepted.
Enter each MAC address that you wish to
include in your filter list, and click Save.
When you enter a MAC address, it appears
in this list. Highlight a MAC address and click
Delete to remove it from this list.
You may create an ACL list and upload it to the
access point instead of manually entering the
information. Once created, click the Browse
button and locate your file. Select it and then
click Upload.
Click Download to export the ACL to a file on
your computer.
Wireless Band:
Access Control
List:
MAC Address:
MAC Address List:
Upload ACL File:
Download ACL
File:
To Next Page
Loading...
