D-Link DAP-2660

D-Link DAP-2660 User Manual
54
Intrusion
The Wireless Intrusion Protection window is used to set APs as All, Valid, Neighborhood, Rogue, and New. Click the Save button to let your changes
take eect.
Wireless Band:
Detect:
AP List:
Set as Valid:
Set as Neighborhood:
Set as Rogue:
Set as New:
Select the wireless band used here. Options to
choose from are 2.4 GHz and 5 GHz.
Click this button to initiate a scan for APs on
the network.
Select the type of APs to display in the
table. Options to choose from are All, Valid,
Neighbor, Rogue, and New.
Select an AP from the list and click this button
congure the selected AP as a valid AP.
Select an AP from the list and click this button
congure the selected AP as part of the
neighborhood.
Select an AP from the list and click this button
congure the selected AP as a rogue AP.
Select an AP from the list and click this button
congure the selected AP as a new AP.