D-Link COVR-1102 User Manual

12D-Link COVR-1102 User Manual
Section 3 - Conguration
Click on the Internet icon to bring up more details about your Internet
connection. Click IPv4 or IPv6 to see details of the IPv4 and IPv6 connection
respectively.
The Home page displays whether or not the master COVR Point is currently
connected to the Internet. If it is disconnected, click Click to repair to bring up
the setup wizard, refer to Wizard on page 16 for more information.
Click Release IP Address to release the current IP address and disconnect
from the Internet. If you wish to reconnect the Internet, click Renew IP
Address.
To recongure the Internet settings, click Go to settings at the bottom-right.
Internet

D-Link COVR-1102 Specifications

General

DC-in jack	Yes
Ethernet LAN (RJ-45) ports	2
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11a, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Cabling technology	10/100/1000Base-T(X)
Security algorithms	WPA-PSK, WPA2, WPA2-PSK, WPA3
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11g, IEEE 802.11n
Wi-Fi data rate (max)	866 Mbit/s
Certification	FCC, IC, CE, ErP
Product color	White
LED indicators	Status
Antenna type	Internal
Type	Network transmitter
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Maximum transfer distance	- m
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	8.55 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Sustainability certificates	RoHS
Flash memory	16 MB
Internal memory	128 MB
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	92 mm
Weight	197 g