EasyManuals Logo

D-Link COVR-1102 User Manual

D-Link COVR-1102
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #46 background imageLoading...
Page #46 background image
42D-Link COVR-1102 User Manual
Section 3 - Conguration
DHCP Server
Status: Enable or disable the DHCP server.
DHCP IP Address
Range:
Enter the starting and ending IP addresses for the DHCP servers IP
assignment.
Note: If you have reserved static IP addresses to client devices, make
sure the IP addresses are outside of this range or you might have an IP
conflict. Refer to Connected Clients section 14 for how reserve IP
addresses for clients.
DHCP Lease Time: Enter the length of time for the IP address lease (in minutes).
Always Broadcast: Enable this feature to broadcast your network's DHCP server to LAN/
WLAN clients.
Advanced Settings
WAN Port Speed: You may set the port speed of the Internet port to 10 Mbps, 100
Mbps, 1000 Mbps, or Auto (recommended).
UPnP: Enable or disable Universal Plug and Play (UPnP). UPnP provides
compatibility with networking equipment, software, and peripherals.
IPv4 Multicast
Streams:
Enable to allow IPv4 multicast trac to pass through the master COVR
Point from the Internet.
Click Save when you are done.
Network (Continued)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link COVR-1102 and is the answer not in the manual?

D-Link COVR-1102 Specifications

General IconGeneral
DC-in jackYes
Ethernet LAN (RJ-45) ports2
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standards802.11a, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Cabling technology10/100/1000Base-T(X)
Security algorithmsWPA-PSK, WPA2, WPA2-PSK, WPA3
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11g, IEEE 802.11n
Wi-Fi data rate (max)866 Mbit/s
CertificationFCC, IC, CE, ErP
Product colorWhite
LED indicatorsStatus
Antenna typeInternal
TypeNetwork transmitter
Ethernet LAN data rates10, 100, 1000 Mbit/s
Maximum transfer distance- m
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (max)8.55 W
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 90 %
Sustainability certificatesRoHS
Flash memory16 MB
Internal memory128 MB
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth92 mm
Weight197 g

Related product manuals