D-Link COVR-X1862 - Modem Preparation for Connection; Power Off and Disconnect Modem

10/28/21, 1:50 PM
D-Link Technical Support
https://support.dlink.ca/ProductInfo.aspx?m=COVR-X1862
4/13
Step 5: Unplug the power to your modem or gateway, then tap NEXT
NOTE: Make sure all lights are off on the modem, if not then you may need to remove the battery from the
modem.
Step 6: Connect the Ethernet cable from your modem/gateway into the Internet port on the COVR
Tap NEXT