D-Link COVRC1200A1 Manual

12
2
Select COVR-C1203 from
the model menu and tap
NEXT
3
As this is the rst time
you are setting up a
Covr network, select
Create a new Covr
network from the
menu and tap NEXT
4
Follow the instructions
to plug in the rst Covr
Point and connect it to
your existing modem*.
Be sure to begin with the
Covr Point marked “A”.
Tap NEXT
*You may need to enable
bridge mode on your ISP-
provided modem/router.
Set Up Using the D-Link Wi-Fi App
C100 M0 Y19 K23
Pantone 3145C
5
On your mobile device, go
to Settings and use the
Wi-Fi utility to connect
to the Wi-Fi name (SSID)
printed on the back of the
device. Once connected,
return to the D-Link Wi-Fi
app and tap NEXT
1.
Open the app and tap
Install Your Device.
12

D-Link COVRC1200A1 Specifications

General

Brand	D-Link
Model	COVRC1200A1
Category	Wireless Router
Language	English