EasyManua.ls Logo

D-Link DCM-200 - Specifications; Cable Network Subsystem Specifications; Interface and LED Specifications

D-Link DCM-200
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DCM-200 USB/Ethernet Cable Modem
A
Specifications
Cable Network Subsystem
RF MAC Protocol:
MCNS/DOCSIS 1.0 Compliant
Security
RSA and MCNS 40/56 bit DES data encryption security
Downstream – Receiver
Demodulation — 64 QAM/256 QAM
Data Speed — 30.342Mbps (64 QAM)/42.88Mbps (256 QAM)
Frequency Range — 91 MHz – 857 MHz
Channel Bandwidth — 6 MHz
Receive Level — -15dBmV to +15dBmV
Upstream – Transmitter
Modulation — QPSK/16 QAM
Data Speed — 320K, 640K, 1280K, 2560K, 5120Kbps (QPSK)
640K, 1280K, 2560K, 5120K, 10240Kbps (16 QAM)
Frequency Range — 5 MHz to 42 MHz
Channel Bandwidth — 200K, 400K, 800K, 1.6M, 3.2M (Hz)
Transmission Level — +8 to +55dBmV (16 QAM)
+8 to +58dBmV (QPSK)
Error Correction — Reed-Solomon
Interface
CPE Interface — 10BASE-T Ethernet (RJ45)
RF Interface — F-Type Female 75 ohm connector
USB Interface — USB 1.1 compliant, Type B receptacle
LEDs
Power
Link
Act
Status
Power Supply
AC-to-DC power adapter (provided)
DC Input: 12VDC/1A
D-Link DCM-200 - Specifications; Cable Network Subsystem Specifications; Interface and LED Specifications